footage

APV Now Captures In 4K UHD!

Hello all! Great news comes from APV in the form of the latest revolution in cinematography; capturing and delivering video and media content in 4K (3840x2160p) or Ultra High Definition using the Sony A7S camera and Atomos Shogun recorder.

Seeing the release of both the Sony A7S and Atomos Shogun at industry events, I was so keen to get my hands on this kit. Unlike DSLR's the A7S is mirrorless which means it's body is around 1/3 the size of the Canon 5D mkIII, it has incredible light sensitivity, the features to film in both slow-motion and using the S-Log gamma curve make it an ideal production camera in a tiny body.

I first saw the Shogun outside of an expo at the Shadows and Light workshop, a friend was showing me some footage he shot the evening before on the setup in 4K. He showed me the captured footage, and then applied the LUT in the Shogun to show what the result would be after grading.. I was blown away. Both as a monitor and a recorder, the Shogun excels at capturing HD and 4K video and audio with in-built monitors such as waveform and vectorscope, peaking, zebras, as well as recording in a range of formats at a much higher bit-rate than in camera recording - 220Mbit/s HD and 440Mbit/s 4K (I think) which is perfect for grading and video-focused productions to filmmaking.

I invested into Canon EF equipment a couple of years back as the 5D mkIII was to best option for large sensor filming, so instead of spending out on native Sony E mount lenses I purchased both the Metabones EF-E mount mk IV and the Commlite EF-E mount to use my current lenses.

Also knowing that the batteries for the A7S (FW-50) are much smaller in capacity than the LP-E6 Canon batteries, I ordered another 4 Sony's with the camera and two from Amazon with another charger (EX-Pro). Inevitably, all of the accessories came before the camera did.. So I eagerly charged and labelled up the kit and get it ready for the camera to arrive!

The camera came last week and not having any new toys for a while I was keen to play around and check out the cameras features straight away! Glen came over as the camera arrived, so he became my willing subject. I hooked up the Tamron 24-70 to the Metabones which worked fine and shot some handheld video, as the lenses vibration control was active. I also have an eyecup for the little viewfinder for another point of contact, to reduce the shake if I need to hand-hold for some shots.

As I was waiting for numerous deliveries to arrive (including the Shogun), I was housebound for a while so I made do with the plants in the garden and my cat for things to film. Here's some of the first footage captured -

A7S and Soligor 35-140 with metabones waiting for the Sparrows

A7S and Tamron 24-70 with metabones in the cage. Soon to be replaced by the Movcam rails kit.

A mix of footage shot for the first time on the Sony A7S, probably in No Picture Profile. Really love the image with the lenses that I have, very organic with fantastic light sensitivity. It was also impressive hooking up the Atomos Shogun to the 5D mk III for 1080p in ProRes HQ, which gives much more latitude for colour grading and post work because of the much higher bit rate.

The best friend has bought a swanky new Audi, so he took me for a spin! I was still getting used to the photo mode and controls, it was past 8pm with the sun only just set so the ISO was wacked up reasonably high.

Because the cable for connecting the A7S to the Shogun hadn't arrived yet (from Atomos) I went searching around Epsom with no avail for a micro HDMI to HDMI cable. I ordered one off Amazon for evening delivery, which came while I took the photos of Sams new car!

I was overly happy with the recorded images that I captured in the mean time with the Shogun hooked up to the 5D mk III. I decided to record them in ProRes HQ to see how far I could push the footage in colour correction, post and grading. It worked fantastically, so much in fact that I'm deeply considering teaming the 5D mk III with another Atomos recorder for the same reasons as above.

I finally got my hands on a micro HDMI cable to road test the 4K HDMI output from the A7S to the Shogun, and just as I began to film, Alfie the cat decided he wanted to join in! I don't remember the picture profile, but it was shot with a pretty wide aperture on the Tamron 24-70. I also tried out the down-ressing method that I'll be using for 4K filming but delivering in HD, so I edited the 4K sequence twice, one in native 4K resolution and the other in a 1080p sequence with some clips scaled down or cropped. NOTE - please change the resolution to the highest possible for the best results!

4K still from the Shogun recorder, shot in 4K ProRes HQ

Let me know what you think!

NOTE - Change resolution to 2160!!!

A short first test filming in 3820x2160 UHD-4K resolution in ProRes HQ on the Atomos Shogun, with the Sony A7S camera. No correction/sharpening/grading in camera or post. Exported in H.264 with a target bitrate of 100Mbits, hoping it holds! I tried to shoot some orchids, but my cat Alfie saw what was going on and wanted to join in!

4K version on Vimeo, remember Vimeo does not have 4K playback yet so this has been down-ressed by Vimeo. Please watch the Youtube video above for the 4K version.

As a comparison, this is the down-res version of the 'Creatives and their cats' video originally shot in 3840x2160 4K-UHD using the Atomos Shogun and Sony A7S. View the original here - This version has been scaled down in Premiere by 50%, with some re-framing in a 1080p sequence, with 4K footage. No correction, sharpening, grading in camera or post. Originally shot in ProRes HQ. I tried to shoot some orchids, but my cat Alfie saw what was going on and wanted to join in! The cropping and re-framing of 4K footage for 1080p HD delivery is a brilliant feature to have, meaning high quality footage can be future-proofed and still delivered in great HD resolution.

I also shot some Picture Profile tests to compare the colours, DR, contrast and noise, this is to come later!

Testing out the new Panasonic GH4

There have been three new arrivals at JHWF HQ this morning, three beautiful Panasonic Lumix GH4's! panasonic gh4

I've had the opportunity to check out the GH4 at Park Cameras a few months ago, so today was a great opportunity to get proper hands on with the new camera system!

We didn't have time to do a proper test, so I took a few shots to demo the 4K at 100Mbps AND the 1080p 50fps features that are currently exporting in Premiere now.

Out of the box, holding the camera using the viewfinder seems so natural for video, as well as the OLED live screen which produces a clear as day image with overlays.

Using the stock lens 14-140mm F/3.5-5.6 (equivalent to 28-280) the image was sharp, with very minor chromatic aberration at 140mm. I am used to a 'full frame' look, but remembering that the Arri Alexa has a similar sensor size the the GH4, what lacks in the stock lens can be gained using the wide range of primes available for M4/3 mount.

The OIS stabilization was actually incredible. This being hand-held, the shots were very shaky at the long end, but the OIS did a brilliant job of stabilizing the image.

Another fab feature is the variance in recording formats, whether you are shooting on a green screen, or footage that is live streamed, the data rates are manageable and not small enough for heavy compression meaning grading the footage should be a breeze. (In my test video coming very soon I have NOT graded any footage).

Things to make note of: If you are going to purchase a GH4 but currently shoot with Canon EF lenses, do not worry. Lensadaptors have developed a M4/3 to EF adapter, there is also one from Blackmagic to Nikon G mount, and rumors are circulating that Metabones are working on a direct M4/3 to EF lens as we speak!

Well, there will be LOTS and LOTS more to come as I continue to play and test out the GH4 so watch this space!

panasonic lumix gh4 4k footage export

BASIC TEST VIDEO -

[vimeo http://vimeo.com/93516685]

Using Magic Lantern on 5D mark III firmware 1.2.3... Help!

I am very keen to hear from any Canon 5D owners that have successfully loaded Magic Lantern onto their mk III with the firmware version 1.2.3. This update is the most recent, and fixed a number of 'phenomenons' which can be found on Canon's site.

ImagePhoto from Magic Lantern website.

From what I have seen on the vast internet that most creatives using ML on the mark III have rolled back their firmware to 1.1.3, which is the most up to date fw ML can install on. The results are fantastic, especially for shooting RAW; a particular interest of mine.

ImagePhoto from EOSHD website.

If you've ever installed Magic Lantern before, you would have seen on the complete screen details of a 'Bootflag' which had been successfully changed to allow ML to run.

The problem now occurs that with the recent Canon firmware update to 1.2.3 they changed something to do with the 'Bootflag' making it difficult for ML to be loaded onto the camera.

I know nothing about programming and developing so most of what is discussed in this forum is jargon to me, but it looks like it will take some time and very smart coders to work around this rather unhelpful nudge away from 3rd party hacks to develop Magic Lantern to run on the new firmware.

http://www.magiclantern.fm/forum/index.php?topic=8764.0

Why don't I roll back my firmware to 1.1.3 you ask? I don't want to! It was installed by Canon for a reason, to make the camera as best as it can be, and I would rather avoid stepping back a number of versions just in case it compromises the camera and my work. As you know, I'm a videographer so photo updates aren't too important to me, but it is all key to keeping the camera functioning properly.

For anyone owning a Canon camera, please install Magic Lantern on it, it is an incredible plug in to assist your video and photo needs, providing you with great solutions to make shooting on a DSLR easier. You can learn more and download it here! Remember to support them too!

Please get in touch if you have been successful installing ML on firmware 1.2.3, I need you!!

Strategic grading with 'burnt in' footage.. Canon/Manfrotto/Elinchrom Promo for SWPP Conference 2014

I continue to work on the promo videos for Canon/Manfrotto/Elinchom today. After shooting the material in a 'neutral' picture style, there was still a lot of contrast, sharpness and saturation in the image. This has caused a couple of problems with the adjustment of the levels and colours when grading. Burnt in footage is where detail is lost due to a crushed dynamic range, out of focus picture, or a mis-interpreted colour balance (and plenty more). This footage is notably harder to work with due to the loss of detail; and when you come to colour correct or grade the shots, life becomes more difficult as hues and light levels are burnt in to the image. Applying numerous filters and effects to remedy this can only add noise and grain, and degrade the footage so it is important to remember to flatten the image before shooting!

Even with a neutral picture style selected, the internal settings for contrast, saturation etc sometimes remain the same, so remember to go into the picture style settings and set them all to the lowest. This will achieve a flat picture which is much easier to work with in post. For those who don't wish to apply heavy corrections or grading to your shots, shooting in neutral will work fine too, just add contrast when editing to remove the gamma grey curve and punch out the sharpness!

I've had to resort to black and white images for some shots due to burning in detail in low light shooting situations.

Here are some example frames of what I have been working with, and how I have graded them.

pregrade frame canon manfrotto elinchrom promo videopostgrade20

pregrade frame canon manfrotto elinchrom promo video Copyright Adam Plowden Videography 2014

postgrade frame canon manfrotto elinchrom promo video Copyright Adam Plowden Videography 2014

These are the frames from the second video. I was in a studio conversion for the MUA part, and Bjorn's place for the shoot. White balance wise it was cool, and when shooting directly into the the window I got a lovely hazy light effect.

pregrade frame canon manfrotto elinchrom promo video Copyright Adam Plowden Videography 2014 postgrade frame canon manfrotto elinchrom promo video Copyright Adam Plowden Videography 2014

pregrade frame canon manfrotto elinchrom promo video Copyright Adam Plowden Videography 2014 postgrade frame canon manfrotto elinchrom promo video Copyright Adam Plowden Videography 2014

pregrade frame canon manfrotto elinchrom promo video Copyright Adam Plowden Videography 2014 postgrade frame canon manfrotto elinchrom promo video Copyright Adam Plowden Videography 2014

We shot the first part at Gylly beach in Falmouth with Carly who runs an extreme fitness group called BootyCamp. Going for a gritty, filmic look for the gym part I used negative bleach bypass. For the beach, I tried to add some drama to the already crashing sea, unluckily for us it was freezing cold so we weren't up for staying there for long.

Captured with the Canon 5D Mark III, Tamron 24-70 F/2.8 VC, Sigma 70-200 F/2.8 OS, Samyang 14mm T/3.1, 35mm and 85mm T/1.5. Post production in Adobe Premiere Pro CS6 and graded using the in built colour correction tools and Red Giant Magic Bullet Looks.

When all the components to my new editing system arrive I am going to be transferring the grading workflow to Adobe SpeedGrade instead of Magic Bullet due to its ease of use, features and tools for cinematic grading as well as having an accelerated 2GB GPU with CUDA graphics... :D

The videos will be released next week on Vimeo, so watch this space for updates! If you can't wait until then, get down to SWPP on Saturday where I will be showing the video with Bjorn and talking about working with video on DSLR!

This gives you a bit of an example of what I've done to work with footage that has some lacking detail, creating a visual style to convey the subject of the video.

Interested in more of what I do? Check out my website, follow me on twitter, watch my videos! Oh and please share my blog and website if you can :)

Got any questions? Send them my way!

[contact-form][contact-field label='Name' type='name' required='1'/][contact-field label='Email' type='email' required='1'/][contact-field label='Comment' type='textarea' required='1'/][/contact-form]

Stills Copyright Adam Plowden Videography 2014.

 

Gettin' Hitched?

A quick still from the wedding I shot with John Harris Wedding Films yesterday at Wotton House in Surrey. Awesome day, and Harry and Sammi are a lovely couple! wottonhousewedding

It's always a blast working with John and Ashleigh, especially when I get to shoot on a 5D with a Glidetrack slider! John shot some awesome footage from his areal camera too!